|
|
|
Now Test DDR2 memory Modules |
 |
|
got
memory in your PC's? Then you need to test it!
|
|
Now
take the guess work of good or bad memory in your PC's, and
eliminate most intermittent memory errors. |
|
$ave
time * $ave money * $ave memory |
|
|
Call
Today, to see if you qualify for any Educational, GSA or Reseller
Discounts at 281-879-6226 |
 |
|
Introducing the
RAMCHECK
DDR2 240-PIN ADAPTER |
|

The RAMCHECK
DDR2 Adapter (p/n INN-8668-12), is our newest development and
has expanded the RAMCHECK into the DDR2 platform of memory testing.
The RAMCHECK
DDR2 adapter will test 240-pin PC2-3200, PC2-4300, PC2-5300/PC2-5400
and PC2-6400* DDR2 memory modules (*please refer to table below). Testing includes registered memory
modules (ECC and non-ECC) and un-buffered memory modules that
comply with JEDEC standards.
The new DDR2 adapter plugs into the existing
RAMCHECK base memory tester. The
DDR2 Adapter will also works with the base tester for the
RAMCHECK
DDR1 or RAMCHECK
DDR1 Plus
memory testers. |
Test
DDR2 Memory Modules
Today!!!
By building the Test Engine on an adapter and keeping the connections
between module and test engine as short as possible makes the DDR2 adapter the most cost-effective solution for
testing high-speed DDR2 modules. Inn addition to the built in features
usually found in test equipment costing $20,000 or more.
Considering that 2GB DDR2 modules sell for
hundreds of dollars and 4GB DDR2 modules sell for over a thousand, the
RAMCHECK DDR2 Adapter will pay for itself in
NO TIME…
The
RAMCHECK DDR2 Adapter also enables you test DDR2 200-pin SO DIMMs for
Laptops with the
RAMCHECK DDR2 200-pin
SO DIMM Converter.
This inexpensive converter is
designed for Low Volume testing of Laptop memory and fits inside the
DDR2 adapter.
As with all of the RAMCHECK memory tester products, the
adapter is extremely easy to use and No special setup is
required. Just insert the adapter RAMCHECK memory tester base unit, turn
the tester on, insert a module into the test socket, then press the F1
button.
The RAMCHECK DDR2 adapter is very easy to operate, with little
training or setup required. As with all of the RAMCHECK memory
testers, each memory module's size, type and configuration are
automatically detected, without the need for user's setup. The test flow
follows our standard Basic Test, Extensive Test, and
Auto-Loop process.
As with all our RAMCHECK Memory
Testers you still have the ability for SPD bit Programing, saving SPD
bit files and Free firmware upgrades through the internet.
DDR2 Frequency Support
The RAMCHECK DDR2
adapter can perform actual test frequencies up to 667MHz.
The DDR2 test engine can achieve 800MHz internal diagnostic speeds and 800MHz
modules can be functionally tested on the DDR2
adapter but at a reduced frequency.
|
RAMCHECK DDR2 Coverage |
|
PC2-3200 |
PC2-4200 |
PC2-5300
PC2-5400 |
PC2-6400 |
|
DDR2-400Mhz |
DDR2-533Mhz |
DDR2-667Mhz |
DDR2-800Mhz |
|
Test at
full frequency |
Test at
full frequency |
Test at
full frequency |
Test at
lower frequency |
Product
operation and specifications are subject to change without prior
notice.
|
|